Cleanroom installation
Design-and-build installation of equipment and the surrounding cleanroom construction, to your cleanliness and environmental requirements.
Vicfil designs, builds and tests cleanrooms across Malaysia, and makes the equipment in-house. Explore one cleanroom with every Vicfil product in place: pick a product to see where it fits and what it does for your ISO 14644-1:2015 certified cleanroom class.
Each filter protects the one after it. Get the sequence right and your final HEPA/ULPA stage lasts longer and holds class.
Capture coarse dust at the air handler so finer stages are not overloaded.
See range →Take out finer particulate before air reaches the terminal stage.
See range →The final high-efficiency stage that sets your cleanroom class.
See range →Pushes HEPA-clean air down in a steady, even flow over the work zone.
See FFU →Verified on site with airflow testing and FFU commissioning.
How we test →
AIndustrial Air FiltersPrimary, secondary, HEPA/ULPA, chemical and mesh filters for semiconductor, pharmaceutical, hospitals, airports and food plants.Explore →
BCleanroom EquipmentAir showers, fan filter units, laminar flow benches, passboxes, jumpsuit cabinets, pressure relief dampers and ceiling grids.Explore →
CLab FurnitureLab benches, chemical storage cabinets and lab cabinets planned around each workstation.Explore →
DLab EquipmentBiosafety cabinets, ducted and ductless fume hoods, and lab accessories.Explore →
ECleanroom Apparel & ESD ProductsLint-free garments, ESD gloves, masks, wipers, sticky mats and ESD control products.Explore →Need a cleanroom?Tell us your process and target class. We design, build and commission the whole cleanroom.Talk to an engineer →Vicfil Sdn Bhd designs cleanrooms, builds and manufactures the equipment in-house, then installs and tests it on site, from its base in Puchong, Selangor. For over 10 years we have served hundreds of clients nationwide in semiconductor, pharmaceutical, hospital operating theatres, laboratories, optics and food & beverage.
Our vision: to become one of the largest cleanroom equipment manufacturers in Malaysia.
Our story →Design-and-build installation of equipment and the surrounding cleanroom construction, to your cleanliness and environmental requirements.
Functional testing of every EC or AC fan filter unit after installation, so it runs to your requirement and the cleanroom design specification.
On-site airflow tests to confirm the room meets its design specification, and fixes for any insufficient airflow found.








Electronic Devices











PGEO Edible Oils



Vicfil Sdn Bhd is a cleanroom company in Puchong, Selangor, that designs, builds, installs and tests cleanrooms in Malaysia. It also manufactures cleanroom equipment in-house, including air showers, fan filter units, passboxes and laminar flow benches, and supplies industrial air filters, lab furniture and cleanroom apparel.
A fan filter unit is a ceiling-mounted module that combines a fan with a HEPA or ULPA filter to supply clean, unidirectional air into a cleanroom. Vicfil supplies FFUs and functionally tests and commissions every EC or AC unit on site after installation.
An air shower is an enclosed chamber at the cleanroom entrance that blows filtered, high-velocity air over people to remove particles from their garments before they enter. You need one when personnel are the main contamination source. Vicfil makes single-door, double-door, L-shape and tunnel air showers.
ULPA filters capture smaller particles at a higher efficiency than HEPA filters. HEPA is typically rated at least 99.97% at 0.3 µm, and ULPA at least 99.999% at 0.12 µm. HEPA suits most pharmaceutical and hospital cleanrooms, while ULPA is used where the class is stricter, as in semiconductor fabs.
Your ISO class depends on your process and industry. ISO 14644-1:2015 defines classes 1 to 9 by the number of airborne particles allowed, with ISO 1 the cleanest. Tell us your process and Vicfil will recommend a class and design the room, filtration and airflow to meet it.
Yes. Vicfil products can be customised to your size, layout and process requirements, because they are manufactured in-house.
Yes. Vicfil serves and delivers to clients nationwide across Malaysia from its Puchong, Selangor base.
Send your process and what you need. A Vicfil engineer replies with a recommendation and quotation.
Need to attach drawings? Use the full enquiry form →